[Review] MINISO 블루투스 이어폰(MINISO-K6H)

'MINISO-K6H Bluetooth Earphones' UNBOXING(언박싱)

가격은 위안화 단위로 199元, 한화 약 32000원. (1위안 ≒ 160원)

박스안에는 제품 설명서, 본품, 충전케이스, 이어팁(이어캡)이 들어있습니다.

제품설명서는 중국어, 영어로 되어있습니다 (그래서 언젠간 한국어로 번역해보려합니다^__^)

충전은 케이스에 이어폰을 쏙쏙 집어넣고, 위에 버튼을 눌러주시면 됩니다.

그럼 케이스는 어떻게 충전할까?

케이스의 뒤쪽에 있는걸 열면 나오는 usb타입의 충전단자로 충전합니다.

이어폰 본품에는 이렇게 L / R 이 명확하게 적혀있고, 옆모습은 뚠뚠하고 짧아서 귀여운 모습입니다.

Product Manual (제품설명서)

# Specification

Model: K6H

Bluetooth version: v4.2

Battery type: rechargeable polymer lithium battery

Rated voltage: 3.7V

Input: DC5V-500mA(pedestal)

Support agreement: A2DP/HFP/HSP/AVRCP

This product can receive voice frequency from phone, lap top and other Bluetooth devices.

Once paired with PC Bluetooth DONGLE, it can play various voice documents.

# Function Introduction

Multi-function button("MFB" in short)

Start-up: press the MFB button for 5 seconds, the blue light flashes for 3 times, and the earphones start up.

Shutdown: press the MFB button of the earphones for 5 seconds while the product is not connected with other devices and under starting up status. When the earphones are connected to the peer device after starting up, press the MFB button of any device for 5 seconds, and the two headphones are off. Put it back on the charging seat to charge, it will turn off.

Pairing mode: when it is not connected, double-click the MFB button to enter matching mode.

The searching time is 2 minutes. Red and blue lights flicker alternately.

Search peer device: in the shutdown state, press the MFB button for 7 seconds to enter the peer device searching state.

The searching time is 2 minutes. Red and blue lights flicker alternately.

Connect peer device: the peer devices is in searching mode(red and blue lights flicker alternately), automatically connect.

First pairing of single earphone: in the shutdown state, press the MFB button for about 7 seconds, the red and blue lights flicker alternately. Turn on the Bluetooth function of the phone and search the device. When the phone find the "MINISO-K6H", click it to connect. After connection, the light flashes off.

Double earphones pairing for the first time: when used for the first time, press the MFB for both earphones about 7 seconds at the same time in the shutdown state, until the red and blue lights flicker, the right and left earphone will pair automatically. About 10 seconds later, one earphone lights fade out while another keeps flashing(the main earphone), open the phone's Bluetooth immediately, find "MINISO-K6H", and connect, after connection, lights flash out.

Voice dialing: in standby mode, press the host MFB key for 1 seconds and release.

Final redial: in standby or listening mode, double-click the host MFB button to dial the last dialing-number.

Hang up: while answering or calling, press the host MFB button shortly to end the call.

Reject: long press the MFB key and release to refuse the call.

Answer: press the host MFB button briefly to answer the call.

Play/pause: in standby of listening mode, 1. If connected with a peer device, press the host MFB button. 2. If connected with a peer device, press the MFB key on any headset.

Three-way call: 1. Click the host MFB button to answer or hang up the call. 2. When the second call comes during a dialog, double-click the host MFB button to answer the second call and keep the first call.

IOS power display: Bluetooth headphone power can be displayed on iPhone.

Reset: in charging state, double-click MFB key to clear all paired information.

Reconnect: within the connection range, automatically connect the paired Bluetooth device after starting up.

In standby mode, press the main device briefly reconnect. If it is beyond the available range during call, answer, standby or listening, return to the accessible range (within 3 minutes), it will reconnect automatically.

Low power alarm: when the battery voltage is lower than 3.3V, low power voice prompt, red light flash.

Automatic shutdown: 1. No connection after starting up, and the earphones will off after 3 minutes.

2. When the battery voltage is lower than 3.0V, the Bluetooth headset turns off.

Charging: red light on and earphones off while charging.

Full Charge: about 1-2 hours. when charged, the blue light will be on for 15 minutes before it goes off.

# Caution

1. Store and use this product in room temperature.

2. Avoid exposing to rain and moisture environment.

3. Throw or drop will damage the product.

4. Do not self-disassemble or modify it.

5. Please dispose the battery according to the local rules, recycle it if possible. It cannot be disposed as household waste, it can cause environmental pollution.

Review

중국 칭다오 여행 중에 미니소에서 구매한 이 낯선아이.

다른 블루투스 이어폰을 사용해보지 않아서 비교할 수는 없지만, 이 제품의 첫 리뷰인만큼 객관적으로 리뷰하겠습니다!

우선 줄이 없는 코드프리 이어폰 처음 써봤는데 굉장히 편하다.

가격도 에어팟에 비해 훨씬 저렴하고, 샤오미의 에어닷보다도 저렴하다.

그러나!

싸게 파는데는 이유가 있는듯하다.

막귀인 나에게도 '미니소 블루투스 이어폰'의 음질은 나쁘다.

음량을 크게 키우면 안들리는데, 음량을 작게 했을 경우 거슬리는 기계음이 노래와 함께 들린다.

또 다른 단점은, 마이크가 있는지 잘 모르겠다는 것이다.

휴대폰 녹음기로 테스트하는데, 휴대폰과 조금 떨어진상태에서도 녹음이 되지 않았다.

전화도 해보려했는데,

녹음과 마찬가지로 휴대폰과 조금 떨어진 상태에서는 상대방이 안들린다고 짜증을 냈고,

휴대폰 근처에서는 스피커폰으로 통화하는듯하다고 하여 종료했다.... (후에 다시 테스트해볼 예정이다)

국내에서는 보지 못한 것 같아 선물용까지 구매했으나, 선물하고도 욕먹을까봐 조금 더 테스트 해보려한다.

cf. 막귀: 이어폰, 헤드셋 등의 음향기기로 노래를 감상할 때 음질이 좋고 나쁨을 잘 구별하지 못하는 귀